
The condition for its time is very good. The technicals are perfect. Fully working, without restoration, everything is native. It is a rarity such a tape recorder in the sales market. Professional studio tape recorder. Includes a power cord and complete instructions with a laboratory report. The Hungarian company “Mechanikai Laboratorium” (Mechlabor) was engaged in the production of high-performance reel-to-reel tape recorders from 1972 to 1992 in Pecs. The production of STM-200 reel-to-reel tape recorders took place 1971 1972 in the city of Dunakeszi, located in central Hungary, in the county of Pecs. Since 1972, the STM 210 and STM-210b reel-to-reel tape recorders have been produced in Pecs. In 1972, 60 machines were manufactured, in 1973, 400 machines. Since the mid-70s, its own production of magnetic heads (Mechlabor / ML) was launched in Budapest, at first these were monophonic tape heads. For tape recorders of the STM 200 and STM 300 series, German erase heads (Munich, Germany) were installed. On the STM-210 model, Philips stereo heads were used. Recording is carried out on two tracks across the entire width of the tape. For the convenience of repair and maintenance, the STM 310 reel deck has a block design. The deck has three magnetic heads: 1 for recording, 1 for playback and 1 for erasing a recording. To control the recording in the STM 310 tape recorder, a loop-through function is provided. Three motors are involved in the transport mechanism. Two fast rewinds of the magnetic tape and one for rotation of the tonal shaft. For the accuracy of the belt speed, a quartz speed stabilizer is used. Smooth speed control is used for convenience when rewinding the tape. A mounting table located above the magnetic head assembly facilitates tape bonding. The built-in power amplifier provides control when selecting tracks. Professional XLR connectors are used to connect other electronic components. Technical characteristics of the professional tape recorder Mechlabor (ML) STM-310. Belt speeds: 38.1 and 19.05 cm / s Belt speed deviation: +/- 2%. Tape slippage: about 0.1% Input / output: balanced level 0… Input impedance: about 5 ohms (30 Hz 15 kHz) Output impedance: about 60 ohms (30 Hz 15 kHz). Output load: 200 ohms Frequency response: 30 Hz – 16 kHz. Tolerance: 30 63 Hz: 0… 3.5 dB, 63 10000 Hz: 0… 2 dB and 10000 16000 Hz: 0… Signal-to-noise ratio: 62 dB Distortion at 1 kHz: about 1.5%. Crosstalk measured at 1 kHz: about 40 dB Erase level at 1 kHz: about 80 dB. Knock factor (DIN 45 507): 0.04% Ready time: about 0.5 sec. Rewinding time 1000 m tape: 150 sec Time correction: 35 microseconds. Maximum coil diameter: 290mm Range voltage before and after drive shaft: 75g ± 10g. The item “Professional Studio Reel To Reel Recorder Mechlabor (ML) STM-310″ is in sale since Friday, July 30, 2021. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Reel-to-Reel Tape Recorders”. The seller is “ussr.shop” and is located in Krivoy Rog. This item can be shipped worldwide.
- Model: ML STM-310
- Modified Item: No
- Country/Region of Manufacture: Hungary
- Custom Bundle: No
- Type: Tape Recorder
- Brand: Mechlabor