Tested, all functions are working, and it sounds great! Comes with original paperwork package. Some info from the web. A smartly designed, solid state stereo’Custom’ deck with auto reverse and featuring three heads: erase, combined record/playback and an Akai patented cross-field head bias. Auto reverse was enabled via foil tape inserts for continuous playback in both directions. Three motors were employed. A hysteresis synchronous three-speed motor for capstan and two 6-pole outer-rotor motors for supply and take-up reels. Slide type level controls were provided and the standard Akai two-lever transport operation was retained. Tape lifters ensured quiet wind/rewind and ensured minimum tape and head wear. Other features included a solid state pre-amplifier with two integrated circuits, mono/stereo track selector, 100 kHz bias for FM multiplex recording, auto stop/shut-off and instant stop/start button, automatic tape speed equalisation, automatic pinch wheel release, DIN connector with switch for HI/LOW input, headphone jack, 4-digit index counter a. Hum and noise: less than 10mV at minimum tone control / Distortion: less than 2% (1,000 Hz “0” VU) / Bias frequency: 100 kHz / Erase ratio: better than 70 dB / Semi-conductors: 14 transistors and 2 IC’s / Rewind speed: 75 seconds for 1,200 ft / Equalisation: correct equalisation for playback of tapes recorded to the NAB curve / Inputs: Microphone: more than 0.5mV Line: more than 50mV DIN: more than 50 mV (high), more than 5mV (low) / Outputs: Line:’0′ VU (1.23V) DIN 0.4V Headphones: 150 mV / 8 ohms / quarter-track stereo. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Reel-to-Reel Tape Recorders”. The seller is “highlandlassie777″ and is located in this country: US. This item can be shipped to United States.
- Brand: Akai
- Type: Tape Reel
- Model: X-200D
- Country/Region of Manufacture: Japan